PCB32 / PROJECT HARDWARE
Find the parts for your next build.
Browse development boards, displays, wireless modules and prototyping hardware. Check each product for specifications and available options.
Показаны результаты 661–680 из 1248
-
-
Плата ввода-вывода Geekworm X1502 V1.0 с четырьмя портами M2 NVMe SSD и портами Ethernet 1 Гбит/с и 2,5 Гбит/с для Raspberry Pi CM5
$77.60Overview The X1502 is a purpose-built carrier board designed for the Raspberry Pi Compute Module 5 (CM5), combining dual Ethernet (1GbE + 2.5GbE), four M.2 NVMe slots, and versatile peripherals in a compact form factor. it provides high-speed connectivity and ample storage capacity in a space-efficient design. The PCIe 2.0 interface ensures fast data transfer…
-
Универсальная плата управления для роботов, совместимая с Raspberry Pi и Jetson Nano, поддерживает связь по Wi-Fi, Bluetooth и ESP-NOW.
$32.90Universal driver board designed for robotics projects. Compatible with Raspberry Pi and Jetson Nano, supporting Wi-Fi, Bluetooth, and ESP-NOW communications for flexible control and automation.
-
Высокоскоростной USB 2.0 концентратор-изолятор Ginkgo EVC9103 – расширение портов с поддержкой преобразования одного порта в три со скоростью 480 Мбит/с и функцией улучшения сигнала.
Ценовой диапазон: от $58.60 до $69.80High-Speed Data Transfer Supports high-speed data transfer rates of up to 480 Mbps, ensuring efficient and rapid data communication between connected devices. Isolation for Noise Reduction Provides electrical isolation to reduce noise and interference, which is particularly beneficial for sensitive peripherals that require a clean power supply. Multi-Port Expansion The hub expands one USB port…
Выберите параметры У этого товара есть несколько вариантов. Выбрать нужный вариант можно на странице товара -
Gitter ECP5 FPGA Entwicklung Bord RISC-V Farblicht 5A-75B с открытым исходным кодом LFE5U
$15.20Buy Gitter ECP5 FPGA board with LFE5U chip and RISC-V support. This open source development board features RGB LED indicators and is ideal for hardware hacking and digital design.
-
Дополнительный модуль GNSS для Seeed Studio XIAO – интерфейс UART, мини-GPS/трекер, на базе Quectel L76K.
$18.90Product Wiki & Tutorials Use hardware UART and TinyGPSPlus to receive L76K data, distinguish serial reception from a fix and display fresh coordinates. L76K GNSS with XIAO ESP32-S3: UART & First GPS Fix → Features: 🌱 Enhanced Reception Built-in Low Noise Amplifier and Surface Acoustic Wave Filter for improved sensitivity and noise reduction. 🌱 High…
-
Плата расширения с разъемами GPIO (HAT) для Raspberry Pi, Raspberry Pi, PICO 2 Вт, RP2350, макетная плата, микроконтроллерные проекты.
Ценовой диапазон: от $11.90 до $14.90Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires Four sets of 2×20 male header, allows connecting more Raspberry Pi Pico expansion modules USB power input connector, ensures sufficient power supply for multiple expansion modules Breakout RESET button, convenient for debugging Clear pinout…
Выберите параметры У этого товара есть несколько вариантов. Выбрать нужный вариант можно на странице товара -
Модуль GPS-RTK UM960 — плата разработки, поддерживающая BDS/GPS/GLONASS/Galileo/QZSS, высокоточная дифференциальная RTK-система с точностью до сантиметра, 20 Гц.
$89.00Выберите параметры У этого товара есть несколько вариантов. Выбрать нужный вариант можно на странице товара -
Grove – AHT20 I2C датчик температуры и влажности промышленного класса
$8.90Product Wiki & Tutorials Connect the Grove AHT20 at 3.3V, use the correct I2C socket and read temperature and humidity with an Arduino example. Grove AHT20 with ESP32: I2C Temperature & Humidity → Features 🌱Excellent long-term stability: Quick response and strong anti-interference ability, and normal use in harsh environments 🌱Suitable for most industrial scenarios: temperature…
-
Grove – зеленый светодиодный модуль общего назначения в форм-факторе Grove, поддерживающий регулировку ориентации и яркости светодиодов.
$4.90Features 🌱Support different color LEDs: The LED is plugged into the LED holder rather than soldered on the board 🌱On-board potentiometer adjustment: Support brightness control and a higher range of input voltages 🌱Easy to use: compatible with Grove port, just plug-and-play 🌱High Flexibility: The ingenious PCB design enables you to bend the LED to any…
-
Grove – Датчик освещенности v1.2
$5.90Product Wiki & Tutorials Connect the Grove Light Sensor v1.2 to an ESP32 ADC, average readings and set repeatable light thresholds without inventing a lux conversion. Grove Light Sensor with ESP32: Analog Readings → Technical setup notes Analog Grove output for relative ambient-light trends; raw ADC readings are not calibrated lux values. Use a 3.3…
-
Grove – Многоканальный газовый датчик v2
$50.90Features 🌱Independent measurement units ensure accurate results: encapsulates four MEMS sensor devices completely independent 🌱High-performance gas sensor: high gas sensitivity and high measurement stability 🌱Ability to monitor multiple gases: besides carbon monoxide (CO), nitrogen dioxide (NO2), ethanol (C2H5CH), volatile organic compounds (VOC), and more 🌱Qualitative detecting, rather than quantitative. 🌱Compact size for easy deployment. …
-
Grove – Пьезоэлектрический/активный зуммер
$3.90Features 🌱Piezoelectric buzzer with wide compatibility: Can produce a variety of pleasant sounds and analog sound, intermittent sound. Pure timbre, not easily covered by noise 🌱Low power consumption: It is driven by voltage, so the current consumption is small, generally under 20mA, not more than 100mA. 🌱Awesome volume: sound output: > 85 dB 🌱Easy to…
-
Grove – PIR Motion Sensor-Low-cost&Easy-to -use motion detector-beginners friendly
$13.90Product Wiki & Tutorials Compare adjustable, Mini and Digital Grove PIR sensors, wire them for ESP32 3.3 V logic and read motion without an extra Arduino library. Grove PIR Sensors with ESP32: Wiring and Motion Test → ESP32 connection notes Adjustable PIR motion detector with digital SIG output. It reacts to changes in infrared radiation;…
-
Grove – Temperature & Humidity Sensor(DHT11)
$8.90Product Wiki & Tutorials Read the Grove DHT11 temperature and humidity sensor with ESP32, select the correct library sensor type and troubleshoot invalid readings. Grove DHT11 with ESP32: Wiring, Arduino Code and Read Errors → DHT11 identification and ESP32 connection notes The labelled DHT11 uses one timed digital signal, not I2C. Select DHT11 in the…
-
Grove – VOC and eCO2 Gas Sensor (SGP30)
$21.90Product Wiki & Tutorials Read the Grove SGP30 at one-second intervals, understand estimated CO2, and plan humidity compensation and baseline handling. SGP30 with ESP32: TVOC, eCO2 & Baseline Setup → Technical setup notes SGP30 metal-oxide gas sensor module with TVOC (ppb) and CO2-equivalent/eCO2 (ppm) outputs over I2C. eCO2 is an estimate, not a direct CO2…
-
Grove – Water Level Sensor (10CM)
$10.90Product Wiki & Tutorials Read both I2C sensing groups, report water-level sections and handle missing data while respecting the white immersion boundary. Grove Water Level Sensor with ESP32: I2C Tutorial → Technical setup notes Capacitive water-level sensing over a 10 cm active length with a Grove I2C connection. Module input: 3.3 V / 5 V….
-
Grove Base Hat for Raspberry Pi – 24-Pin GPIO maintain, Grove interface for 3× I2C, 1× UART, 6× Digital, 4× Analog, SWD Debug
$14.90Grove Shield for Raspberry Pi is an expansion board for Raspberry Pi, designed by Seeed Studio, for the orderliness of your connected sensors when you develop projects with Pi. It maintains 24-Pin GPIO and provides 15 additional Grove ports based on the MM32 chip, along with other interfaces, giving you a great and quick development…
-
Grove I2C Color Sensor V2 (TCS34725FN) – RGB Color Sensing
$13.90Product Wiki & Tutorials Wire the Grove V2 color sensor over I2C, read RGBC counts and improve measurements with gain, integration and controlled lighting. Grove TCS34725 with ESP32: RGB Color Sensor Guide → Technical setup notes Grove I2C Color Sensor V2 based on TCS34725FN; do not use a driver intended for an older Grove version…
-
Grove Infrared Emitter used to transmit infrared signals through an infrared LED
$8.50The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side . An infrared LED is like any other LED, with its color centered around 940nm. We can use the emitter not only to transmit data or commands, but…