Показаны результаты 1–20 из 30
-
Оценка: 5.00 из 5
$97.90
Hign-concerned Chemical: None Origin: Mainland China Specification 1: Meshtastic TLora Pager Module Specification 2: Meshtastic LoRa AIoT Devic Specification 3: Meshtastic ESP32S3LoRa GPS Module Specification 4: LoRa SX1262 Wireless RF Module Specification 5: Meshtastic TLora Pager AIoT Devic T-LoraPager Introduction: Next-generation programmable handheld AIoT device from LILYGO combining ESP32-S3 with selectable wireless modules. Features a compact form factor with foldable external antenna,…
-
$178.90 – $640.90Ценовой диапазон: от $178.90 до $640.90
The ball balance robot is a typical underactuated system. It has a single point of contact with the ground. The movement is very flexible and the turning radius is almost zero. It is an ideal platform for automatic theoretical study. This is an experimental version, and the price is relatively low. Of course, it is…
-
$75.90
Major Upgrade The 1.54-inch screen has been upgraded to a 1.69-inch one. The power management chip has been upgraded to AXP2101. The GPIO was reallocated and the circuit was optimized. The cross-head screws have been upgraded to socket hexagon screws. What is it? This is a powerful ESP32-S3 Deauther watch that integrates advanced functions, specifically…
-
$11.80
The new V3 features a 4MB ESP8266, with a redesigned all-white enclosure. It also includes an antenna capable of penetrating the enclosure. DSTIKE Deauth Detector is a portable security device specifically designed to detect WiFi deauthentication attacks. Equipped with a built-in ESP8266 chip and a highly sensitive antenna, it can monitor surrounding WiFi signals in…
-
$18.70 – $26.90Ценовой диапазон: от $18.70 до $26.90
V3->V4 Differences The PH2.0 reverse battery connector has been upgraded to the PH1.25 forward battery connector. An external input protection diode has been added to prevent current from flowing back into the USB. The component positions were adjusted and the charging circuit was re-optimized, which improved heat dissipation and made the circuit run more stably….
-
$32.90
V7->V8 Upgrade Log Upgraded the battery protection chip. Modified some circuits to enhance stability during operation. What is it? This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different…
-
$36.90
Key Features WiFi Security Testing: Pre-installed with the latest Deauther software. Perform deauth attacks, beacons, and probes to test your network’s vulnerability. Highly Extensible: It’s an open-source ESP8266 development platform. Use the Arduino IDE to flash your own scripts and turn it into any smart device you imagine. Long-lasting Power: Equipped with an 700mAh lithium…
-
$38.90
The DEAUTHER Watch Y is a powerful development tool designed for network security enthusiasts and developers. It not only boasts a stylish appearance but also integrates robust WiFi development features. Users can utilize its pad interfaces to connect various sensors and develop custom applications. Whether as an educational tool or for practical projects, the DEAUTHER…
-
$53.90
Function Deauther Attack: Disconnect 2.4G WiFi Deauther Beacon: Create fake networks Deauther Probe: Confuse WiFi trackers Packet Monitor: Display WiFi traffic Clock: Real Time Clock Adjustable Bad USB Attack: The Human Interface Device (HID) Attack Disclaimer This project serves as a proof of concept for testing and educational purposes. It is important to note that…
-
$129.80
What is it? The Deauther32 Watch Max is the highly anticipated, fully upgraded successor to the popular Deauther32 Watch Mini! Built for hackers, makers, and cybersecurity enthusiasts, this Max version brings massive improvements in battery life, display, connectivity, and hardware expandability. What’s New Compared to the Deauther32 Watch Mini? Upgraded Display: Features a stunning 1.69-inch…
-
Оценка: 5.00 из 5
$27.90 – $30.90Ценовой диапазон: от $27.90 до $30.90
По вопросам OEM/ODM-решений для ESP32 AI обращайтесь по адресу info@esp32s.com.
-
$27.90
ESP32-WROOM-DA is a powerful Wi-Fi + Bluetooth + Bluetooth LE MCU module, with two complementary PCB antennas in different directions. I customized the 16MB memory version and designed this development board around it.With two unique antennas design on one single module, ESP32-WROOM-DA can be used to develop IoT applications that need stable connectivity over a…
-
$76.80
What is it? This is the next generation of the famous Deauther Watch. We have completely overhauled the core hardware, replacing the aging ESP8266 with the cutting-edge Espressif ESP32-C5 RISC-V MCU. This hardware upgrade unlocks what the community has wanted for years: Dual-Band Support. This watch can now interact with, scan, and test both 2.4GHz…
-
$45.90
Features: Powerful ESP32-S3 N16R8 dual-core processor – perfect for games, graphics, and IoT experiments Built-in 1000mAh rechargeable battery for long playtime Type-C port for both charging and data transfer (USB cable included) Dual buzzers for rich and responsive sound effects Six responsive buttons – Up, Down, Left, Right, A, and B Transparent case – see…
-
$20.90
What makes it special? Including a 128MB TF card Including a white casing. The red light indicates an issue with the TF card or it’s not inserted. The green light indicates that the TF card is working properly. Supports 21 types of scripts. The TF card contains source code and 21 TXT files. Including a…
-
$18.50
Major Upgrades 128Mb TF card -> 256Mb TF card Some control pins have been changed. What is it? It is a DSTIKE version bad usb tool.It is also an Arduino Leonardo developement board. Why did you make it? Every one knows Hak5 usb rubber ducky is a great tool. I created my own version based…
-
Оценка: 5.00 из 5
$2.25 – $2.45Ценовой диапазон: от $2.25 до $2.45
Wide compatibility: The distribution board is only suitable for the 38PIN narrow version ESP32 without mounting holes. Important note: ESP32 Breakout Board GP10 1into 2 is only compatible with 38 Pins ESP32, which means it is only used for NodeMCU-32S Lua 38Pin. Not suitable for ESP-WROOM-32DevKit V1 version. Please confirm that the pin width of…
-
Оценка: 5.00 из 5
$73.90
The kit is without batteries, and the battery is sold separately, and the battery type is 18650 3.7v, with no capacity limit, there is a link and QR code for downloading instructions on the manual. Effortless Wireless Video Control With the ESP32 CAM WiFi module, you can effortlessly control and monitor your Arduino programmable robotic…
-
Оценка: 5.00 из 5
$18.90
Hign-concerned Chemical: None Type: Module Brand Name: DIY NOW Origin: Mainland China Condition: New There are FAQs at the bottom of the details page Product Introduction: T190 (HT-VMT190) is a development kit with ESP32-S3 and LoRa module (optional). The onboard 1.9-inch TFT-LCD display contains 170 (RGB) X320 dots and can display up to 262k colors. Using the example programs and…
