Модуль платы разработки ESP32-S3R8 Bluetooth Wi-Fi с протоколом LoRaWAN и 1,9-дюймовым TFT-LCD дисплеем T190.

Product Introduction:

Параметр: 

Main control chip: ESP32-S3R8
LoRa chip: SX-1262
Frequency (optional): 433MHz, 470~510MHz, 863~870MHz, 902~928MHz
Power supply interface: lithium battery interface; Type-C interface
Bluetooth LE: Bluetooth 5, Bluetooth mesh
Хранилище:
384KB ROM
512 КБ SRAM;
16 КБ RTC SRAM;
8MB SiPFlash
Supply voltage: 3-5V
Storage temperature: -30~70 ℃
Working temperature: -20~60 ℃
Optimal storage humidity: 0-65%
Display module: N190-1732TPWG01-C30
Screen type: Color TFT
Screen size: 1.9 inches
Display color: 262K
Display area: 22.7 (H) x42.72 (V) mm ²
Display resolution: 170RGBx320
Hardware resources: 7 * ADC1+6 * ADC2; 11*Touch; 3*UART; 2*I2C; 2*SPI;
Interface: Type-C USB;
2 * 1.25 lithium battery interface;
LoRa ANT（IPEX1.0）；
Wi-Fi ANT（IPEX1.0）；
2 * 12 * 2.54 plug pins;
SH1.0-4P sensor interface.
Dimensions: 60×25.4×10.2mm

В комплект входят:
1X плата разработки
2X needle arrangement
2X terminal wire
1X антенна

ЧАСТО ЗАДАВАЕМЫЕ ВОПРОСЫ:

1. What is T190?
T190 is an ESP32+LoRa development board equipped with a 1.9-inch TFT-LCD.

2. Can the on-board 2.4GHz antenna be replaced?
The default configuration of the T190 board is a PCB antenna, and the 2.4GHz antenna is a spring antenna. There is also an additional interface for 2.4GHz wireless signals on the board. When connecting an external antenna, the resistor needs to be rotated 90 degrees to the left.

3. What development methods does it support?
(1)Ard–uino
(2)Micro–Python
(3)Platform–IO
(4)Espressif–IDE
We strongly recommend using Ard–uino. We have full technical support and provide complete LoRa WAN code for the ESP32 Ard–uino framework.

4. What is the type of battery socket?
You can find this type of socket by searching for “SH1.25 x 2”.

5. Can’t find the serial port?
(1) Please reinsert the USB cable, or try a different cable.
(2) If you are using USB adapters, try skipping them and connecting directly to the USB port on the PC.
(3) Open the Device Manager, select the port, and if prompted, try installing the CP210X driver
(4) Try another computer or another syste

6. The serial port does not exist?
(1) Open the Device Manager and check if you can find the device port. If not, refer to the previous topic “I can’t find the serial port.”
(2) Please check if your serial port is open elsewhere.
(3) Enter BootLoader mode for uploading. There are two ways to enter this mode:
(4) Connect the USB cable, hold down the User (or ORG or Boot) key, press RST once, and then release the User (or ORS or Boot) key.
(5) Hold down the User (or ORG or Boot) key, and then connect the USB cable.

7. What are the specifications of the sensor connection cable?
This is a 10cm sensor adapter cable with specifications ranging from SH 1.0-4P to PH 2.0-4P. It is used to connect the development board and the sensor. The SH 1.0-4P port is used to connect to the interface of the development board, while the PH 2.0-4P port is used to connect to the sensor interface.