Browse development boards, displays, wireless modules and prototyping hardware. Check each product for specifications and available options.
Показаны результаты 1221–1240 из 1248
Connecting the WM1302 LoRaWAN module, based on LoRa Concentrator Semtech SX1302. It supports mini-PCIe form-factor and simplifies the development process for users to integrate with all Raspberry Pi versions up to Raspberry Pi 4B. Features Standard Pi Hat form factor with 40 pins female pin header Raspberry Pi versions up to 4B compatible GPS Module…
Product Wiki & Tutorials Check the matrix variant, use suitable 5V power and level-shifted data, then map the panel with a dim moving-pixel example. WS2812 LED Matrix with ESP32: Power, Data & Pixels → 64-LED matrix consists of luminous RGB LEDs of eight per row and column. The WS2812 diodes are individually addressable and can…
WT32-ETH01 Embedded Serial Port Networking Ethernet Bluetooth WIFI MCU Module ESP32 Wireless Combo Gateway Module Board Main features of ETH 01 gateway: Using dual-core Xtensa 832-bit LX6 microcontroller. Integrated SPI flash memory 32 MbitSRAM 520 KB Support TCP server, TCP client, UDP server, UDP client working mode Supports four data ports of serial port, wifl,…
Essential for Xbox 360 repair & modding. This Xecuter CPU Postfix Adapter (Gen 1) is designed for Corona V3/V4 motherboards, providing easy access to POST points for diagnostics.
Frequency:2.4GHz Power supply voltage – small:2.8V Power supply voltage – large:3.4V Transmission supply current:250 mA Receiving supply current:55 mA Output power:63 mW Small operating temperature:- 40 C Maximum operating temperature:+ 85 C Size:32.94 mm x 24.38 mm Interface type:UART Working power supply voltage:2.8 V to 3.4 V Product Type:Zigbee Modules Subcategory:Wireless & RF Modules
Frequency: 2.4 GHZ Scope: 1.6 KM Data rate 250 KB/S Sensitivity -102 DBM Power supply voltage – Minimum value 2.7V Power supply voltage – Maximum value 3.6V Power supply current transmission 205 MA Power supply current reception 47 MA Output power: 63 MW Minimum operating temperature: – 40 C Maximum operating temperature: + 85 C…
Product features: Input voltage: 8 V to 26 V Amplifier type: Class D Number of channels: Dual channel Output power: 10W+10W Output impedance: 4 Ω -8 Ω Efficiency: up to 90% Sound quality: distortion far below 10%. Protection: Output short circuit protection, overheating protection. Function self recovery. Module size: 43 * 55 * 14mm usage…
Technical setup notes The complete six-channel module is intended for suitable low-voltage DC loads, following the supplied hardware limits. A relay contact marking is not an approval to operate the assembled module with AC mains appliances. Do not interpret a 250 VAC component marking as a whole-module application rating. Identify COM, NO and NC for…
Для получения информации о ценах при оптовых закупках или решениях OEM/ODM, пожалуйста, свяжитесь с нами. info@esp32s.com
Product Wiki & Tutorials Set up the XIAO ESP32-C3 SAM2695 MIDI synthesizer, upload a quiet first-note sketch, and troubleshoot USB and audio output. XIAO MIDI Synthesizer: Play Your First Note with ESP32-C3 → MIDI programming notes XIAO ESP32-C3 controls the SAM2695 sound engine over a 31250-baud MIDI UART. USB debug serial is separate. Up to…
1. Model name: DC-DC 5A high current step-down power module 2. Module nature: Non isolated voltage reduction 3. Rectification method: asynchronous rectification 4. Input voltage: DC 5V-32V 5. Output voltage: DC 0.8V-24V 6. Output current: Peak 5A (heat dissipation should be strengthened when working above 3.5A) 7. Conversion efficiency: up to 90% 8. Switching frequency:…
This module is an adjustable voltage reduction module with an LED digital tube, which can achieve real-time monitoring of output voltage and current. The output voltage and output current can be changed by adjusting the blue adjustable resistor on the module (refer to the functional diagram below for specific instructions). The input and output voltage…
1. Input voltage: DC 5V-36V 2. Output voltage: DC 1.25V-32V 3. Maximum output current: 5A (recommended for use within 4.5A) 4. Output power: Maximum 75W 5. Working temperature: -40~+85 degrees Celsius 6. Operating frequency: 180KHz 7. Conversion efficiency: up to 96% 8. Short circuit protection: Yes 9. Overtemperature protection: Yes (automatically shuts off output after…
XL6009 is a high-performance boost (BOOST) module with 4A switching current. This module uses XL6009E1, a second-generation high-frequency switch technology, as the core chip, which has much better performance than LM2577, a first generation technology. The XL6009 boost module has lower cost and superior performance, The LM2577 module is about to be phased out. …
XL6009 is a high-performance boost (BOOST) module with 4A switching current. This module uses XL6009E1, a second-generation high-frequency switch technology, as the core chip, which has much better performance than LM2577, a first generation technology. The XL6009 boost module has lower cost and superior performance, The LM2577 module is about to be phased out. …
High-concerned chemical: None Package: SMD is_customized: Yes Application: Computer Type: Voltage Regulator Brand Name: NoEnName_Null Origin: Mainland China Condition: New Model Number: XL6009 Module Parameters: Input range: 3.8V-32V Output range: 1.25V~40V Input current: 3A (maximum), no-load 18mA (5V input, 8V output, no-load less than 18mA. The higher the voltage, the greater the no-load current. ） Conversion efficiency:<94% (the greater the pressure difference, the…
Specification: Voltage Supply: 9-12V DC Input Waveforms: Square, Sine & Triangle Impedance: 600 Ohm + 10% Frequency: 1Hz – 1MHz SINE WAVE Amplitude: 0 – 3V at 9V DC input Distortion: Less than 1% (at 1kHz) Flatness: +0.05dB 1Hz – 100kHz SQUARE WAVE Amplitude: 8V (no load) at 9V DC input Rise Time: Less than…
Instruction Yahboom G1 Uno R3 smart robot tank is a very cool and completely functional tracked tank robot with Arduinos UNO R3 as the core controller. The entire vehicle adopts 2mm blue thickened aluminum alloy frame. Most of the components are connected with screw and copper pillar, and a few parts are designed with anti…
Product selling points: 1. The product adopts 32-bit microcontroller, adopts graded M/T speed measurement algorithm, taking into account the high and low speeds 2. The product has both speed measurement and counting functions, both can measure the speed and can be used as a counter. 3. The product can be mounted on the guide rail…
