SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa
SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa - Image 2
SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa - Image 3
SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa - Image 4
SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa - Image 5
SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa - Image 6

Солнечный узел SenseCAP P1 / P1-Pro для Meshtastic, панели 5 Вт, nRF52840 и SX1262 LoRa

Ценовой диапазон: от $92.90 до $120.90

⇄ Add to compare♡ Add to wishlist
Гарантированная безопасная оплатаPayPal, Mastercard, Visa, Maestro, Apple Pay and Google Pay logos
SKU: 1005008917538805 Category:

Функции и совместимость

Вики-страница продукта и обучающие материалы

Compare SenseCAP P1 and P1-Pro, select the correct Meshtastic firmware, test a first message and check solar power before outdoor deployment.

SenseCAP Solar Node P1 / P1-Pro: Meshtastic Setup and Outdoor Checks →

P1 and P1-Pro package / setup notes

  • Both options use XIAO nRF52840 Plus and SX1262, not an ESP32 MCU. Select the Seeed SenseCAP Solar Node firmware target.
  • P1 does not include GPS or four 18650 cells in the standard package; P1-Pro is documented with the L76K GPS module and four 3350 mAh cells.
  • A 5 W panel rating and open-area radio-distance examples do not guarantee continuous operation or a fixed range. Test the actual radio link and daily energy balance before unattended deployment.

Особенность

It is an economical solar-powered comms node or repeater based on Meshtastic. It meets basic comms needs in no – network zones. Unlike P1-Pro, P1 lacks a built-in GPS module and four 18650 batteries, yet keeps core comms. It’s perfect for budget-constrained scenarios or those not needing precise location, like environmental monitoring and short – range network setups.

Примечание:

SenseCAP Solar Node P1 is cost-effective and lacks the XIAO L76K GPS module and four 18650 batteries. But users can buy and install them independently.

For the model with positioning and batteries, opt for the SenseCAP Solar Node P1-Pro.

P1 P1-Pro
SenseCAP Solar Node √ √
• 18650 Batteries x 4 (Built – in) √
• XIAO L76K GPS Module (Built – in) x √
Mounting Brackets
• Universal Joint
• Connector
• Hoop Bracket
• Hoop Ring
 √ √
2dBi 868 – 915MHz Rubber Rod Antenna √ √
RF Cable: RP-SMA Male to RP-SMA Female-300mm √ √
Black Type-C Cable √ √
User Manual √ √
SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa — reference image 1
SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa — reference image 2

🌱Integrated with a 5W solar panel, with battery contents depending on the option: P1 requires user-supplied cells; P1-Pro is documented with four cells.

🌱The device comes pre-installed with Meshtastic firmware at the factory. It can be seamlessly integrated into the Meshtastic ecosystem.

🌱Compatible with the Grove ecosystem, and supports plug-and-play of sensors such as temperature and humidity sensors, light sensors, etc.

🌱It is suitable for long-term outdoor use.

🌱Open-area transmission examples up to 8–9 km; actual range depends on the installation в open areas. It can be used as an outdoor node or repeater, easily expanding the Mesh network and enhancing network coverage.SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa — reference image 3Спецификация

Main controller

XIAO nRF52840 Plus(Nordic nRF52840, ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz, 256KB RAM, 1MB Flash, 2MB onboard Flash)

Модуль LoRa

Wio-SX1262 Module(Semtch SX1262, TXOP=22dBm@862-930MHz)

GPS Module

P1: optional user installation; P1-Pro: includedXIAO L76K(Support GPS/GLONASS/Galileo)

Антенна

LoRa:

Type: Rod-shaped rubber antenna

Frequency range: 868-915MHZ

Gain: 2dbi

GNSS:

GPS L1 C/A: 1575.42MHz

GLONASS L1: 1602MHz

BeiDou B1: 1561.098MHz

Bluetooth 5.0

Solar Panel

5W

Интерфейс

Grove *1: IIC/GPIO

USB-C debugging

Кнопка

Power on/off

Перезагрузить

User-defined

ВЕЛ

Charging status indicator lights *2

Solar panel status indicator light *1

Mesh heartbeat light *1

User-defined *1

Power supply

5 В

Батарея

P1 version without batteries;

P1 Pro Version includes batteries

4 x 18650 lithium batteries (3350mAh each)
● Supporting Type-C and solar charging.
● Discharge environment：-40 ~ 60°C
● Charging environment: 0 ~ 50°C

Измерение

191.2 x 201.2 x 42.1 mm
Обзор оборудования

🌱Overall effect diagramSenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa — reference image 4🌱Accessories diagramSenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa — reference image 5

①

2dbi, 868~915MHz rubber rod antenna

②

Universal joint bracket, angle adjustable.

③

Bracket connector, can support the antenna

④

RF Cable; RP-SMA Male to RF-SMA Female; 300mm

⑤

Hoop bracket

Diameter:

70-100mm

⑥

Hoop ring
🌱Interactive itemsSenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa — reference image 6

⑦

Power switch

⑧

Перезагрузить

⑨

User-defined

⑩

Red light on: Charging

⑪

Green light on: Charged

⑫

Yellow light on: Device is exposed to light.

⑬

Blue light: Mesh heartbeat

⑭

White light: User-defined

⑮

Type-C: 5V 1A

🌱Dimension diagramSenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa — reference image 7ПриложениеSenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa — reference image 8🌱Приключения на природе: Send real-time location and text messages in areas without network coverage.

🌱Mesh Network Expansion: Serve as a Mesh relay node to expand the coverage of the existing Meshtastic network. Support multi-hop transmission, where data can be relayed through multiple nodes, enhancing network reliability.

🌱Educational Experiments: Learn about the development of Meshtastic and LoRa decentralized networks.

🌱Environmental Monitoring: Provide a Grove interface to connect sensors for remote monitoring of the environment (such as temperature, humidity, air quality, etc.).

Список деталей

Selected SenseCAP Solar Node P1 / P1-Pro; GPS and battery contents depend on the option

x1

Mounting Brackets

🌱Universal Joint

🌱Разъем

🌱Hoop Bracket

🌱Hoop Ring

x1

2dBi 868 – 915MHz Rubber Rod Antenna

x1

RF Cable: RP-SMA Male to RF-SMA Female-300mm

x1

Black Type-C Cable

x1

User Manual

x1

Additional information

Масса Н/Д

Reviews

There are no reviews yet.

Be the first to review “SenseCAP Solar Node P1 / P1-Pro for Meshtastic, 5W Panel, nRF52840 and SX1262 LoRa”

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Related products