Плата разработки ESP32-S3 Pico ESP32-S3R2, двухъядерный процессор 2,4 ГГц, Wi-Fi, чип BTLE5 CH343/CH334, интерфейс Интернет вещей, 2 МБ PSRAM, 16 МБ Flash-памяти.

   Обзор

• The ESP32-S3-Pico is a low-cost, high-performance microcontroller development board with a compact size and rich peripheral interfaces.

• Adopts ESP32-S3R2 as the main chip, which is an MCU chip with integrated 2.4 GHz Wi-Fi and Bluetooth 5 (LE).

• The interface chips are CH343 and CH334, so you can experience the fun of USB and UART development with a single USB-C port, and no more trouble switching interfaces.

• The DC-DC chip adopts MP28164, a high-efficiency buck-boost chip, which adopts PWM fixed-frequency current control mode to optimize circuit stability and response speed.

• You can choose ESP-IDF, Arduino, MicroPython, or other development environments in software so that you can easily and quickly get started and apply it to the product.

   Функции

• Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz

• Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory

• Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance.

• Разъем Type-C, проще в использовании.

• Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface

• Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip with load current up to 2A

• 27 × multi-function GPIO pins

• Rich peripheral interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-bit ~ 16-bit camera interface), LCD interfaces (8-bit ~ 16-bit parallel RGB, I8080, MOTO6800), etc. to achieve various functions flexibly

• Castellated module allows soldering directly to carrier boards

• Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios

• Supports Raspberry Pi Pico expansion board ecology, suitable for artificial intelligence IoT application development

Полный комплект SDK, ресурсы для разработчиков, обучающие материалы, которые помогут вам легко начать работу.

 

Powered By Xtensa 32-Bit LX7 Dual-Core Processor With Frequency Up To 240 MHz

Powerful AI Computing Capability & Reliable Security Features

 

ESP32-S3 Integrates 2.4 GHz Wi-Fi (802.11 B/G/N) With 40 MHz Of Bandwidth Support

Its Bluetooth Low Energy Subsystem Supports Bluetooth 5 (LE) And Bluetooth Mesh

 

Configurable Pin Function, Allows Flexible Development And Integration

Note: SPI, I2C, UART and other interfaces can be mapped to most GPIOs through the GPIO Matrix and IO MUX, see the ESP32-S3 datasheet for details.