1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson
1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson - Image 2
1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson - Image 3
1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson - Image 4
1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson - Image 5

1,54-дюймовый ePaper HAT+ (G) E-Ink дисплей красного/желтого/черного/белого цвета 200*200 для Raspberry Pi/Arduino/STM32/Jetson

Ценовой диапазон: от $12.90 до $17.90

⇄ Add to compare♡ Add to wishlist
Гарантированная безопасная оплатаPayPal, Mastercard, Visa, Maestro, Apple Pay and Google Pay logos
SKU: 1005008777700383 Category:

Функции и совместимость

1.54 inE-ink screen module

Low power consumption, wide viewing angle, clear display even when power is off

For display applications such as shelf labels, industrial instruments, etc.
1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 11.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 2

выбор версии

1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 3

Функции

  • No backlight is required, and the last screen display content can be kept for a long time when the power is off. The power consumption is very low, and basically only consumes power when refreshing. Provide a complete supporting manual (driver board schematics, Raspberry Pi / Jetson Nano / Arduino and other sample programs) The following is only applicable to the module version SPI control interface, which can be connected to the main control board such as Raspberry Pi / Jetson Nano / Arduino. The onboard level conversion chip is compatible with 3.3V and 5V microcontroller interfaces
  • No backlight required, the last screen display can be kept for a long time after power failure
  • The power consumption is very low, basically only consuming power when refreshing
  • Provide complete supporting manuals (driver board schematics, Raspberry Pi / Jetson Nano / Arduino and other sample programs)The following applies only to the module version

  • SPI control interface, can be connected to Raspberry Pi / Jetson Nano / Arduino and other main control boards

  • Onboard level conversion chip, compatible with 3.3V and 5V microcontroller interfaces

  • Параметры продукта

  • Operating voltage Bare screen version: 3.3V Отображение цвета Red, yellow, black, white
    Module version: 3.3V / 5V
    Communication interface 3-wire SPI、4-wire SPI Grayscale 2
    Размеры Bare screen version: 37.32 × 31.8 × 1.00 (mm) Fast refresh 15s
    Module version: 48.00 × 33.00 (mm) Global Refresh 20s
    Display size 27.0 × 27.0 (mm) Refresh power consumption <30mW
    Dot Pitch 0.135 × 0.135 (mm) Sleep current <0.01uA (close to 0)
    Разрешение 200 × 200 pixels Угол обзора >170°

  • Advantages of E-Ink Screen

    The electronic ink screen uses “microcapsule electrophoretic display” technology to display images. Its working principle is that charged nanoparticles suspended in liquid migrate under the action of the electric field, and form a display effect close to traditional printed paper through reflection under ambient light. The electronic ink screen can display images clearly under ambient light such as light and natural light, without backlight, and the viewing angle is almost 180°. Because its display effect is comparable to that of traditional paper, it is often used in applications such as readers.

    1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 4

  • SPI control interface

    Can be connected to Raspberry Pi / Jetson Nano / Arduino and other main control boards

    1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 5

    ВЦК 3.3V / 5V
    НД НД
    DIN SPI communication MOSI pin
    CLK SPI Communication SCK Pin
    КС SPI chip select pin (active low)
    округ Колумбия Data/command control pin (high level indicates data, low level indicates command)
    РСТ External reset pin (low level reset)
    ЗАНЯТЫЙ Busy status output pin

  • Onboard level conversion chip

    Compatible with 3.3V and 5V microcontroller interfaces

    1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 6

  • Сценарий применения

    Applicable to shopping mall price tags, asset equipment labels, electronic shelf labels, conference name tags, etc.

    1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 7

  • Размер изделия

    Naked screen vers1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 8

    Module version

    1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 9

1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson — reference image 10

Additional information

Масса Н/Д

Reviews

There are no reviews yet.

Be the first to review “1.54inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White Display Color 200*200 For Raspberry Pi/Arduino /STM32/Jetson”

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Related products