Показаны результаты 21–28 из 28
-
$230.90
Note: reComputer R1100 provides flexible IoT wireless communication(4G, LoRa®, Wi-Fi/BLE, Zigbee) and essential functional modules (GPS, UPS, TPM2.0, PoE, SSD, etc.). 🌱Customize, Configure, and Engineer your own reComputer R1100 🌱Check the assembly guide 🌱Upgrade it to an AIoT gateway with Raspberry Pi AI Kit for Raspberry Pi 5 Specification Parameter Description Hardware Spec Product Series R1100 Series R1000…
-
$133.90
Key Features 🌱Open-Source Support: Easily customize and develop users own LoRaWAN solutions for seamless integration into their specific use cases. Check out details here. 🌱Support Multiple LoRaWAN® Network Servers: Compatible with multiple LNS like AWS, TTN, ChirpStack, etc. via using the Packet Forwarder / Basics™ Station mode. 🌱Built-in LoRaWAN Network Server: Based on Chirpstack, provides…
-
$398.00
Features 🌱8-in-1 Weather Station: Collect air temperature, humidity, wind speed/direction, Rainfall Intensity, light intensity, UV index, and barometric pressure data in one device and upload them via LoRaWAN 🌱Bluetooth Configuration in 1 min & Remote Management: Simple configuration with just a few clicks, supports remote monitoring and managing real-time & historical data via the SenseCAP…
-
$92.90 – $120.90Ценовой диапазон: от $92.90 до $120.90
Product Wiki & Tutorials Compare SenseCAP P1 and P1-Pro, select the correct Meshtastic firmware, test a first message and check solar power before outdoor deployment. SenseCAP Solar Node P1 / P1-Pro: Meshtastic Setup and Outdoor Checks → P1 and P1-Pro package / setup notes Both options use XIAO nRF52840 Plus and SX1262, not an ESP32…
-
$59.80
Technical setup notes SenseCAP T1000-E is the Meshtastic tracker variant using nRF52840, LR1110 and AG3335 GNSS. It is not an ESP32 development board. T1000-A/B LoRaWAN firmware is not interchangeable with the T1000-E Meshtastic firmware. Match the device label and update package before flashing. Use the magnetic data/charging connection specified for this product and preserve the…
-
Оценка: 5.00 из 5
$18.90
Dominant Frequency: 240MHZ Flash: 32M-Bits Processor: Tensilica LX6 Dual Core Master chip: ESP32 LoRa chip: SX1276 SX1278 Support frequency band: 868-915MHZ/433MHz Open communication distance: 2.8KM Computing capacity: up to 600DMIPS Dual-mode Bluetooth: traditional Bluetooth and BLE low-power Bluetooth Development environment: perfect support for Arduino Operating voltage: 3.3-7V Operating temperature range: -40-90 ° Receiver sensitivity: -139dBm…
-
$23.90
Features 🌱High Performance: The transmit power up to 22dBm @868/915MHz; -136.5dBm sensitivity for SF12 with 125KHz BW. 🌱Long Distance Use:158dB link budget 🌱Wireless Connectivity: Embedded Long Range protocol, AT command, support global Long Range frequency plan 🌱Use-friendly: It features fully lead-out GPIOs, as well as convenient RESET and BOOT buttons on board. 🌱FCC, CE, IC…
-
$37.90
Features 🌱Powered by Semtech® SX1302 baseband LoRa® chip, extremely low power consumption and high performance. 🌱Mini-PCIe form factor with the standard 52-pin golden finger, easy to integrate with various gateway devices. 🌱Ultra-low operating temperature, no additional heat dissipation needed, reducing the size of LoRaWAN gateway. 🌱High sensitivity down to -139 dBm @SF12 with SX1250 TX/RX…
