Показаны результаты 1021–1040 из 1248
-
$12.90 – $14.90Ценовой диапазон: от $12.90 до $14.90
Designed based on Raspberry Pi RP2350A Version selection Product Features This product is a low-cost, high-performance microcontroller development board designed by Waveshare. In a small form factor, it has onboard peripherals such as a 1.47-inch LCD screen, a Micro SD card slot, and RGB lights, making it easy to develop and integrate into products. The…
-
Оценка: 5.00 из 5
$125.80 – $129.80Ценовой диапазон: от $125.80 до $129.80
Для получения информации о ценах при оптовых закупках или решениях OEM/ODM, пожалуйста, свяжитесь с нами. info@esp32s.com
-
$4.60
Features: 1. It is convenient to detect and set the virtual position, jitter, and neutral position of the server. 2. It can be connected to two sets of servo motors or electrically adjustable; Single chip microcomputer control, good stability, high accuracy, and long service life. 3. If an electronic governor is connected (with or without…
-
$180.90 – $192.80Ценовой диапазон: от $180.90 до $192.80
Feature Fully Open-Source Ecosystem on Hardware and Software Quick Setup & Precision Movement 🌱Lego-like assemble package support. 🌱360° yaw rotation full coverage and 180° pitch range from floor to ceiling. 🌱Brushless Motor Precision: 0.01° stepping accuracy for smooth target tracking. AI-Powered Motion Control 🌱Ready Custom AI Models: Built-in YOLO11 with commercial license, Roboflow & SenseCraft AI support. 🌱Smart…
-
$64.90 – $79.80Ценовой диапазон: от $64.90 до $79.80
Battery Included: No High-concerned chemical: None Compatible With: Others Accessory Type: Sensor Brand Name: seeed studio Origin: Mainland China Specification Hardware Overview You can also contact edgeai@seeed.cc to customize expansion board for your special needs. ECCN/HTS Part List reCamera x1 USB type-c Cable x1 Ethernet Cable x1
-
$899.90
Feature Note If you are looking for the version with power adapter, please check out reComputer J4012 Edge device, this one without power adapter For optimal performance with reComputer, we recommend using 128GB / 256GB / 512GB / 1TB SSDs from Seeed. Since some SSDs on the market may only be compatible with specific JetPack…
-
$230.90
Note: reComputer R1100 provides flexible IoT wireless communication(4G, LoRa®, Wi-Fi/BLE, Zigbee) and essential functional modules (GPS, UPS, TPM2.0, PoE, SSD, etc.). 🌱Customize, Configure, and Engineer your own reComputer R1100 🌱Check the assembly guide 🌱Upgrade it to an AIoT gateway with Raspberry Pi AI Kit for Raspberry Pi 5 Specification Parameter Description Hardware Spec Product Series R1100 Series R1000…
-
$70.90
reComputer Robotics GMSL board is a GMSL extension board designed specifically for reComputer Robotics series of Jetson™ Orin™ NX and Orin™ Nano . Both data and power are sent through coaxial cable. It uses MAX96712 as deserializer, and can be compatible with GMSL cameras that use MAX96717/MAX9295A as serializer. This GMSL board currently has native…
-
Оценка: 5.00 из 5
$6.90
1. Onboard mature and stable ESP-12F WIFI module, large capacity 4M BYTE FLASH; 2. The I/O port of the WIFI module and the UART program download port are all lead out to facilitate secondary development; 3. Onboard AC-DC switching power supply module, the power supply mode supports AC90-250V/DC7-30V/5v; 4. Onboard WIFI module RST reset button;…
-
$16.90
Note: The reSpeaker 2-Mics Pi HAT has been upgraded to version 2.0. The codec chip has been replaced from WM8960 to TLV320AIC3104, enabling support for Raspberry Pi 5 and expanding the sampling rate range from 8 kHz to 96 kHz. 🌱Voice User Interface for Raspberry Pi Series: Placed by 4 analogue microphones, which come with the Voice Interaction algorithms of…
-
$40.90 – $49.80Ценовой диапазон: от $40.90 до $49.80
Product Wiki & Tutorials Identify both USB ports, match XMOS I2S firmware, test microphone input and follow the ESPHome path into Home Assistant. ReSpeaker Lite with ESP32-S3: Home Assistant Setup → Technical setup notes ReSpeaker Lite audio board with a pre-soldered XIAO ESP32S3. The XMOS/XU316 and ESP32-S3 run different firmware. Use the XIAO USB port…
-
$60.90 – $63.90Ценовой диапазон: от $60.90 до $63.90
A professional 4-mic circular array based on XMOS XVF3800, enabling clear target voice capture in noisy environments. Features dual modes, 360°far-field voice pickup (up to 5m), AEC, AGC, DoA, VAD, dereverberation, beamforming, and noise suppression. Feature XMOS XVF3800 Upgrade Smarter voice processing for clearer voice capture—even in noisy environment. Advanced Audio Processing Clear capture in tough environments—featuring…
-
$95.90
Battery Included: Yes High-concerned chemical: None Compatible With: Arduino/Platform IO ESPHome/Home Assistant TRMNL SenseCraft HMI Accessory Type: LCD Screen Brand Name: seeed studio Origin: Mainland China reTerminal E1001 is a 7.5 inch open-source monochrome ePaper display with up to 3-month battery life. Powered by ESP32-S3, it natively supports our SenseCraft HMI no-code UI platform for effortless dashboard creation, while supporting Home…
-
$130.90
ReTerminal E1002 is a 7.3 inch open-source full color ePaper display with up to 3-month battery life. Powered by ESP32-S3, it natively supports our SenseCraft HMI no-code UI platform for effortless dashboard creation, while supporting Home Assistant, TRMNL E-ink dashboard, Arduino and ESP-IDF for further development. With the E Ink® Spectra™ 6 full-color ePaper Display,…
-
$28.90
High-definition 64×64 RGB full-color LED matrix panel with 2.5mm pitch. Suitable for DIY desktop displays, compatible with Raspberry Pi, Jetson Nano, and ESP32 development boards.
-
-
$520.90
По вопросам OEM/ODM-решений для ESP32 AI обращайтесь по адресу info@esp32s.com.
-
$39.80
The SparkFun 3-Phase Brushless Motor Driver, featuring the TMC6300 from ADI + Trinamic, is a powerful and easy-to-use three-phase motor driver that was designed to control our Brushless Gimbal Motor. It can be used to control any 3-phase BLDC or PMSM motor with up to 2A (1.4ARMS) of total drive current. Separate high-side and low-side…
-
$66.90
Important Notes: This robot needs to be assembled and does NOT include battery. (Please refer to the downloaded tutorial to buy battery.) Overview: This is a programmable robot ant kit with dot matrix expression, which can crawl like a creature. Whether you want to experience the joy of robots or learn to program, this is…
-
$148.90
Important Notes: This robot needs to be assembled and does NOT include battery. (Please refer to the downloaded tutorial to buy battery.) Overview: ESP32-WROVER is a powerful and small controller with onboard wireless and camera. This kit shows you how to use it as a controller to build a robot. We provide free technical support…
