PCB32 / PROJECT HARDWARE
Find the parts for your next build.
Browse development boards, displays, wireless modules and prototyping hardware. Check each product for specifications and available options.
Показаны результаты 781–800 из 1248
-
-
M.2 PCIe to 4-Port RS232 Serial Expansion Card (M-Key) – Compatible with Rockchip RK3588/RK3576
$26.90Add 4 RS232 serial ports to your board with this M.2 PCIe expansion card. Designed for Rockchip RK3588/RK3576, this M-Key card is perfect for industrial communication projects.
-
M.2 PCIe to SATA3.0 5-port expansion card mechanical hard disk expansion adapter read and write speed 460MB/s
$25.90Expand your storage with this M.2 PCIe to SATA3.0 5-port expansion card. This adapter adds 5 SATA ports with 460MB/s speed, perfect for connecting multiple hard drives.
-
M093 M093B Inductance Tester Motherboard Coil Tester Inductance Detector Electromagnetic Induction Meter Rapid Fault Detection
Ценовой диапазон: от $1.90 до $3.50Features: 1. Electromagnetic Induction Precision Localization: Directly detects inductor faults without disassembly, doubling repair efficiency 2. Simple Button Operation & Portable Design: Easy to use with long-press button activation; compact size for on-the-go troubleshooting 3. Green LED Directly Indicates Fault Status: Green light on startup indicates normal inductor; instant feedback reduces misdiagnosis 4. High Precision…
Выберите параметры У этого товара есть несколько вариантов. Выбрать нужный вариант можно на странице товара -
Цифровой манометр для измерения давления в автомобильных шинах M11 1/4 1/8 с ЖК-дисплеем и светодиодной подсветкой, предназначенный для проверки и контроля давления в шинах.
$10.90Features: 1. Using copper material joints, pressure resistant sensors, solid metal connections with 1/4 “Npt, 1/8npt, m11 bolts, and a large lcd digital meter display for easy reading. 2. Four types of unit displays can be switched, psi/kpa/bar/kg f cm²， accuracy: 1%. 3. Intelligent automatic recognition of air pressure, with air pressure entering the automatic…
Выберите параметры У этого товара есть несколько вариантов. Выбрать нужный вариант можно на странице товара -
Плата разработки M5stack Cardputer v1.1, 56-клавишная клавиатурная карта, микроконтроллер M5StampS3, основной контроллер, портативный компьютер.
$40.90M5stack Cardputer v1.1 Development Kit Comparison Item Cardputer v1.1 Cardputer Core Module StampS3A StampS3 RGB LED Control Logic RGB LED and screen backlight share the same power supply, with optimized control logic Powered immediately upon power supply Antenna Design Optimized antenna design for improved signal reception Conventional antenna design Key Specifications Optimized key feel with…
-
MaTouch AI ESP32-S3 2,8-дюймовый TFT-дисплей ST7789V
$54.80Features: Controller: ESP32-S3, 16MB Flash, PSRAM 8MB Wireless: WiFi& Bluetooth 5.0 LCD: 2.8″, 320×240 resolution LCD Driver: ST7789V LCD interface: SPI Touch Panel: 5 Points Touch, Capacitive, GT911 USB: 1 * USB to UART CH340K, 1 * USB_native Power Supply: USB Type-C 5.0V(4.0V~5.25V) Camera: OV3660 MicroSD: 32G RGB LED: 1XWS2812 RTC: PCF8563T Charger: TP4056 Microphone…
-
MaTouch ESP32-S3 Поворотный IPS-дисплей 1,28 дюйма GC9A01
$32.90Product Wiki & Tutorials Set up the MaTouch 1.28-inch rotary screen, use the correct GC9A01 SPI demo and troubleshoot touch, encoder and microSD. MaTouch ESP32-S3 1.28-inch Rotary Display: GC9A01 Arduino Setup → MaTouch 1.28-inch model and demo 240 × 240 GC9A01 SPI panel with rotary encoder, press action and capacitive touch; documented memory is 16…
-
MaTouch ESP32-S3 2,1-дюймовый поворотный IPS-дисплей
$47.90Product Wiki & Tutorials Set up the MaTouch 2.1-inch rotary screen, use the correct ST7701 RGB demo and troubleshoot touch, encoder and PSRAM. MaTouch ESP32-S3 2.1-inch Rotary Display: ST7701 and LVGL Setup → MaTouch 2.1-inch model and demo 480 × 480 ST7701S display with RGB565 pixel interface and a control interface; 16 MB flash /…
-
MaTouch ESP32-S3 7″ 1024*600 Параллельный TFT сенсорный экран
$52.90This ESP32 S3 7-inch IPS display could be an ideal displayer& controller for IOT applications. It has 2 versions: High-resolution version 800*480, and Ultra High-resolution version 1024*600; Display on both versions is IPS, and the display effect is beautiful, together with 5 points capacitive touch, great for applications such as home automation; There on-board SD…
-
MAX30102 Blood Oxygen Concentration Sensor Module Detection Wrist Heart Rate Heartbeat Pulse Sensors Module 8PIN STM32 MCU
$1.69MAX30102 Blood Oxygen Concentration Sensor Module Detection Wrist Heart Rate Heartbeat Pulse Sensors Module 8PIN STM32 MCU
-
MAX30102 Blood Oxygen Heart Rate Sensor Pulse Heartbeat Oxygen Concentration Sensor for Arduino Replace MAX30100
$2.90Buy MAX30102 Blood Oxygen Heart Rate Sensor Module for Arduino. This Pulse Oximeter sensor detects heartbeat and oxygen concentration, replacing MAX30100. High sensitivity and low power.
-
MAX3232 RS232 to TTL Serial Port Converter Module DB9 Connector MAX232 For Arduino
$2.20Output voltage: 3.3V-5V Interface type: DR9 female head Pin set interface: TX RX VCC GND(TTL) Suitable for programming microcontroller types: STC, STM32, NXP, NEC, etc
-
Модуль MAX485 RS-485 TTL преобразователь в RS485 MAX485CSA для микроконтроллеров Arduino и MCU, аксессуары для разработки.
$2.20Product Description 1. Power supply voltage: 5V 2. Onboard MAX485 chip, a low-power, limited swing rate transceiver for RS485 communication 3.5.08mm spacing 2P terminal block, RS485 communication wiring 4. Can be connected to a microcontroller for control operations instructions 1. Use two IO ports to control transmission and reception: RE: Receive switch RE=0: Open…
-
MAX6675 Module + K Type Thermocouple Thermocouple Senso Temperature Degrees Module
Ценовой диапазон: от $4.50 до $4.90MAX6675 12 bit resolution serial thermocouple analog-to-digital converter with cold junction compensation, linear correction, and thermocouple breakage detection Product Features: Working voltage: 3.0V-5.0V Working voltage: 50mA Working temperature:-20℃～85℃ Measurement range: 0 ℃ to 1024 ℃, Converter temperature resolution: 0.25 ℃ Application scope 1. Especially suitable for microcontroller enthusiasts, students, research institutions, experiments, and prototype development…
Выберите параметры У этого товара есть несколько вариантов. Выбрать нужный вариант можно на странице товара -
Модуль MAX7219 8*8-точечная матричная система, модуль микроконтроллера с красной подсветкой, модуль дисплея (MCU), модуль управления светодиодным дисплеем.
$2.90Product parameters: 1. Chip: MAX7219 2. Input voltage: DC 5V 3. Serial signal frequency: up to 10MHz 4.8 * 8 common cathode lattice Support cascading use of multiple modules
-
MAX7219 Dot Matrix Module 32×8 4 in 1 LED Display Modules Drive with 5Pin Wires for Arduino Raspberry Pi
$4.90This module is an LED display driver module composed of 4 8 * 8 dot arrays, each with a separate MX7219 driver IC. In addition, it can communicate with other controllers through SPI (Serial Peripheral Interface) and control up to 64 individual LEDs to display different effects, such as animation and text flow images. It…
Выберите параметры У этого товара есть несколько вариантов. Выбрать нужный вариант можно на странице товара -
Mbed-014.1 оценочная плата mbed, приложение
$78.90Mbed application board The mbed application board is a compact shunt board, similar in size to a normal credit card, designed withmbed LPC1768 Cortex-M3controllers are used together. Please visit the website for more information as well as test procedures and sample code:http://mbed.org/cookbook/mbed-application-board What’s onboard? • The LPC1768 mbed module is compatible with double row pin…
-
MCP2515 CAN Bus Module Board TJA1050 Receiver SPI For 51 MCU ARM Controller
$3.20Input voltage: DC5V. Output current: 5ma, standby current 1 microampere; Excluding indicator lights Working temperature: -40~85 ℃
-
MCP2515 CAN Bus Shield Board Module SUB-D Connector Standard UART IIC SPI LED Indicator Controller CAN DC 2.7-5.5V for Arduino
$9.90This is a CAN Bus Shield that uses MCP2515 to achieve data control on the CAN bus and enable data communication between devices. The expansion board is compatible with the Arduino standard, Arduino users can easily access CAN communication by providing a DB9 interface, which can be selected according to their needs. Shield uses Microchip’s…