Radxa UFS/eMMC Module Reader Designed for Radxa SBCs
$20.90Competitive bulk pricing available for Radxa series. Please email info@esp32s.com
Showing 261–280 of 334 results

Competitive bulk pricing available for Radxa series. Please email info@esp32s.com

Competitive bulk pricing available for Radxa series. Please email info@esp32s.com

Competitive bulk pricing available for Radxa series. Please email info@esp32s.com

Competitive bulk pricing available for Radxa series. Please email info@esp32s.com

Competitive bulk pricing available for Radxa series. Please email info@esp32s.com

Competitive bulk pricing available for Radxa series. Please email info@esp32s.com

Competitive bulk pricing available for Radxa series. Please email info@esp32s.com

Competitive bulk pricing available for Radxa series. Please email info@esp32s.com

Connect official displays or cameras to your Raspberry Pi 5. This 22-Pin to 15-Pin FPC adapter cable is available in 200mm or 300mm lengths.

Feature 🌱Raspberry Pi Camera Module Third Generation: Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708) with HDR for up to 3 megapixel output 🌱High-quality Image Output: 4608 × 2592 pixels, along with built-in 2D DPC and QBC Re-mosaic function, offering high SNR 🌱Autofocus System: Phase detection autofocus 🌱CSI-2 serial Data Output: 2-wire serial communication,…

Features This product is suitable for customers with the following needs: Raspberry Pi CM4 IO board. Compatible with 4B Size and functions same as much as possible. USB HUB extends USB 2.0 x 4 Rj45 network port GPIO audio headphone (occupying GPIO18 and GPIO19) Camera and DSI interface.

Frequency range: 2400-2500/5100-5800 MHz Bandwidth: 100-700MHz VSWR: less than equal 2.0 Gain: 2 dBi Impedance: 50 ohm Polarisation: Vertical Radiation: Omnidirectional Maximum power: 10W Board Type: ARM Model Number: Compute Module 4 Antenna Kit

Premium Raspberry Pi HQ Camera module with higher resolution and sensitivity. Compatible with Raspberry Pi series boards for professional imaging and DIY projects.

Feature 🌱 Raspberry Pi High Quality Camera Sensor: 12.3-Megapixel Sony IMX477R, black-illuminated CMOS with great sensitivity, 7.9mm-diagonal sensor for impressive low-light performance 🌱 Support M12 mount lenses: Design to work with most interchangeable M12 lenses 🌱 Suitable for industrial and consumer applications: Offer highest levels of visual fidelity and integration with specialist optics 🌱 Compatible…

Feature You will need a compatible add-on board (HAT) to use this NVMe drive with a Raspberry Pi 5, such as the Raspberry Pi M.2 HAT+, or pick up a great-value Raspberry Pi SSD kit with the Raspberry Pi M.2 HAT+ included. 🌱 Official Raspberry Pi SSD 🌱 256GB NVMe – 40k IOPS (4kB…

Features: 1. It is convenient to detect and set the virtual position, jitter, and neutral position of the server. 2. It can be connected to two sets of servo motors or electrically adjustable; Single chip microcomputer control, good stability, high accuracy, and long service life. 3. If an electronic governor is connected (with or without…

reComputer Robotics GMSL board is a GMSL extension board designed specifically for reComputer Robotics series of Jetson™ Orin™ NX and Orin™ Nano . Both data and power are sent through coaxial cable. It uses MAX96712 as deserializer, and can be compatible with GMSL cameras that use MAX96717/MAX9295A as serializer. This GMSL board currently has native…

1. Onboard mature and stable ESP-12F WIFI module, large capacity 4M BYTE FLASH; 2. The I/O port of the WIFI module and the UART program download port are all lead out to facilitate secondary development; 3. Onboard AC-DC switching power supply module, the power supply mode supports AC90-250V/DC7-30V/5v; 4. Onboard WIFI module RST reset button;…

Note: The reSpeaker 2-Mics Pi HAT has been upgraded to version 2.0. The codec chip has been replaced from WM8960 to TLV320AIC3104, enabling support for Raspberry Pi 5 and expanding the sampling rate range from 8 kHz to 96 kHz. 🌱Voice User Interface for Raspberry Pi Series: Placed by 4 analogue microphones, which come with the Voice Interaction algorithms of…

Product Wiki & Tutorials Identify both USB ports, match XMOS I2S firmware, test microphone input and follow the ESPHome path into Home Assistant. ReSpeaker Lite with ESP32-S3: Home Assistant Setup → Technical setup notes ReSpeaker Lite audio board with a pre-soldered XIAO ESP32S3. The XMOS/XU316 and ESP32-S3 run different firmware. Use the XIAO USB port…