Showing 41–60 of 334 results
-
$13.90
Features: 1. Supports PD 100W high-power fast charging for efficient and rapid charging, meeting diverse device needs 2. Equipped with a TFT color display showing real-time battery level, voltage, and current for clear status visibility 3. Compatible with multiple mainstream fast charging protocols including PD/QC, widely adaptable to various smart devices 4. Built-in multi-level safety…
-
$5.90 – $6.30Price range: $5.90 through $6.30
Features: 1.SAFE AND RELIABLE: The microwave sensor is safe, reliable, high detection probability, low false alarm, high resistance to fog, wind, dust, snow and extreme temperature 2.STABLE: The microwave sensor is based on Doppler principle and RADAR technology, the rod antenna and high performance microchip are used, and the working state is stable 3.DETECT HUMAN…
-
$47.90
Product Wiki & Tutorials Set up the classic TinyPICO ESP32 USB-C board, identify its USB driver, upload a diagnostic sketch and check flash and PSRAM. TinyPICO USB-C: Arduino Upload, Drivers and PSRAM Check → Classic TinyPICO USB-C setup Choose the UM TinyPICO profile for the classic ESP32 board, rather than an ESP32-S3 or TinyPICO[D] profile….
-
$4.70 – $6.90Price range: $4.70 through $6.90
Product Wiki & Technical Support Upload connection errors, USB-base checks, a simple board test and camera compatibility troubleshooting. Follow the instructions for your exact ESP32 or ESP32-S3 board. ESP32-CAM troubleshooting guide → High-resolution 5MP OV5640 Camera Module Equipped with a 5MP OV5640 sensor, this module delivers sharp, detailed images ideal for surveillance, robotics, and IoT…
-
$5.90
• High-Speed Charging :Experience rapid charging with the diymore USB Boost Power Supply Change Module Charger Board. Its Type C PD2.0 PD3.0 ensures fast and efficient charging. • Versatile Compatibility :This versatile charger board is compatible with a wide range of devices, making it a universal solution for your charging needs. • Polling Detector :Equipped…
-
$3.90
Product selling points: 1.Support 6-8.4V voltage input, flexible adaptation of two series-connected 18650 or 26650 lithium batteries, to ensure that in different battery configurations can work stably, to improve the versatility and endurance of the flashlight 2. Integrated switch in the middle of the flashlight, easy to operate with one hand, whether for outdoor adventure…
-
$2.70 – $8.90Price range: $2.70 through $8.90
Features: Model specifications; 3S/8S Balancing method: active balancing of energy transfer Balanced current: maximum 6A (the greater the voltage difference, the greater the current, and vice versa) Equalization accuracy: 0.01V Operating power consumption: 1.5mA-2.5mA Low voltage protection:<2.5V Automatic shutdown Power consumption: OmA Applicable batteries: ternary lithium, lithium iron phosphate, lithium titanate Applicable voltage: monomer 2.5V-4.4V…
-
$33.00
High-quality 6mm CS-mount wide angle lens with a 63° field of view. Designed for Raspberry Pi High Quality Camera, suitable for surveillance, machine vision, and CCTV projects.
-
Rated 5.00 out of 5
$16.90 – $23.90Price range: $16.90 through $23.90
Product Wiki & Technical Support Upload connection errors, USB-base checks, a simple board test and camera compatibility troubleshooting. Follow the instructions for your exact ESP32 or ESP32-S3 board. ESP32-CAM troubleshooting guide → 75MM OV3660 Camera Module for ESP32 CAM ESP32 S3 Development Board 68 80 120 160 Degrees YUV RGB HD 3MP DVP 24PIN Interface
-
$3.90 – $5.30Price range: $3.90 through $5.30
Features: 1. Optional 75W or 200W high power output, suitable for a variety of specifications brushless motor applications. 2. Wide range of input voltage (6-24V), strong compatibility, to meet diversified needs. 3. Built-in intelligent speed control function, precise control of speed, smooth and quiet operation. 4. High-efficiency drive circuit design, low energy consumption, superior heat…
-
$18.90
Introduction Module performance: The AD835 module can be used as a four quadrant multiplier, but the module launched by our store is configured with X1 * Y1 by default, and can be used as a frequency multiplier and a frequency multiplier. The performance is really good, all kinds of signal modulation, stable waveform. The output…
-
$18.90
Features: AD9834 is a 75 MHz, low power DDS device capable of producing high performance sine and triangular outputs. Also integrates its on-chip comparator, support the generation of square for clock generation. When the supply voltage is 3V, the power consumption of only 20mW, very suitable for power sensitive applications. AD9834 provides a phase modulation…
-
$97.60 – $159.80Price range: $97.60 through $159.80
Master FPGA design with the Alinx AX301 Black Gold board. Powered by the Altera Cyclone IV EP4CE6 FPGA, it comes with step-by-step video tutorials covering Quartus, Verilog, VGA, SDRAM, and camera projects, ideal for students and beginners.
-
$70.90
Capture high-speed motion without distortion with the AR0234 USB camera module. Features a global shutter, 90fps frame rate, and is driver-free for easy machine vision integration.
-
$139.60
PTZ is an abbreviation for pan, tilt, and zoom and reflects the movement options of the camera, and a pan–tilt–zoom camera (PTZ camera) is a camera that is capable of remote directional and zoom control. A PTZ camera is not a still camera. Instead, it could move the camera and the lens, and that means…
-
$79.80
Item Description: The Arducam monochrome (B&W) global shutter 1280×800 resolution OV9281 camera module is mainly designed for Raspberry Pi boards, and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware. This Arducam OV9281 global shutter camera (Rev.B) is compatible with the official V4L2 camera driver, and you can get it working…
-
$195.80
ASUS Tinker Board 2S SBC with Rockchip RK3399, 4GB/16GB RAM. Ideal for development, IoT, AI projects. Features GPIO, dual USB 3.0, & Gigabit Ethernet. Buy now.
-
$20.90
Hd video camera for Raspberry Pi A or B, B+ Model 2, Raspberry Pi 3, 3 B+, Pi 4, Pi 5(not available for Pi Zero) 5 megapixel sensor, Omnivision OV5647 sensor, fixed focus lens. Integrated infrared filter Still image resolution :2592 x 1944; Check ASIN:B07RWCGX5K for OV5647 with acrylic box. Arducam B0033 Camera Module for…
-
-
$15.90 – $26.70Price range: $15.90 through $26.70
