Browse development boards, displays, wireless modules and prototyping hardware. Check each product for specifications and available options.
Показаны результаты 1001–1020 из 1248
Доступны конкурентоспособные оптовые цены на серию Radxa. Пожалуйста, отправьте электронное письмо по адресу info@esp32s.com
Доступны конкурентоспособные оптовые цены на серию Radxa. Пожалуйста, отправьте электронное письмо по адресу info@esp32s.com
Доступны конкурентоспособные оптовые цены на серию Radxa. Пожалуйста, отправьте электронное письмо по адресу info@esp32s.com
Доступны конкурентоспособные оптовые цены на серию Radxa. Пожалуйста, отправьте электронное письмо по адресу info@esp32s.com
Доступны конкурентоспособные оптовые цены на серию Radxa. Пожалуйста, отправьте электронное письмо по адресу info@esp32s.com
Доступны конкурентоспособные оптовые цены на серию Radxa. Пожалуйста, отправьте электронное письмо по адресу info@esp32s.com
3.97″ E-Paper Display Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity Ideal for price tags, shelf labels, industrial instruments… Note: the driver board is optional, please refer to the Package Content for detailed part list Version Options Features At A Glance No backlight, keeps displaying last content for a long time even when…
Connect official displays or cameras to your Raspberry Pi 5. This 22-Pin to 15-Pin FPC adapter cable is available in 200mm or 300mm lengths.
Compatibility: Raspberry Pi 5B / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ *(Please note: No HDMI port and not fit for any other device. Compatible only with specific models of Raspberry Pi) Screen Specifications: Size: 4.3 / 5 / 7 inches Resolution: 800 x 480 pixels Refresh Rate:…
Battery Included: No High-concerned chemical: None Compatible With: raspberry pi Accessory Type: LCD Screen Product Introduction 7-inch display with a resolution of 1024×600, configurable to a maximum resolution of 1920×1080 through software settings. capacitive touchscreen, it supports up to 5-point touch. Individual control of the backlight, enabling power-saving by turning it off when not needed. Compatible with popular mini…
🌱Efficient Cooling Solution designed for Raspberry Pi: combines a large metal heatsink with a variable-speed blower, allowing users to use their device under sustained heavy load without the need for a case. 🌱Easy Installation: The cooler attaches to the Raspberry Pi 5 PCB using sprung pins that fit into a pair of mounting holes, ensuring…
Feature 🌱Raspberry Pi Camera Module Third Generation: Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708) with HDR for up to 3 megapixel output 🌱High-quality Image Output: 4608 × 2592 pixels, along with built-in 2D DPC and QBC Re-mosaic function, offering high SNR 🌱Autofocus System: Phase detection autofocus 🌱CSI-2 serial Data Output: 2-wire serial communication,…
Features This product is suitable for customers with the following needs: Raspberry Pi CM4 IO board. Compatible with 4B Size and functions same as much as possible. USB HUB extends USB 2.0 x 4 Rj45 network port GPIO audio headphone (occupying GPIO18 and GPIO19) Camera and DSI interface.
Battery Included: No High-concerned chemical: None Model Number: CM5-NANO-B Brand Name: Waveshare Raspberry Pi CM5-NANO-B Expansion Board Convenient for learning and evaluating the Raspberry Pi Compute Module or integrating directly into products Compute Module 5 Lite/eMMC compatible baseboard Same size as CM5 Compact size, full-featured, integrated with multiple peripheral interfaces, Suitable for applications with limited space This product does…
Frequency range: 2400-2500/5100-5800 MHz Bandwidth: 100-700MHz VSWR: less than equal 2.0 Gain: 2 dBi Impedance: 50 ohm Polarisation: Vertical Radiation: Omnidirectional Maximum power: 10W Board Type: ARM Model Number: Compute Module 4 Antenna Kit
Premium Raspberry Pi HQ Camera module with higher resolution and sensitivity. Compatible with Raspberry Pi series boards for professional imaging and DIY projects.
Feature 🌱 Raspberry Pi High Quality Camera Sensor: 12.3-Megapixel Sony IMX477R, black-illuminated CMOS with great sensitivity, 7.9mm-diagonal sensor for impressive low-light performance 🌱 Support M12 mount lenses: Design to work with most interchangeable M12 lenses 🌱 Suitable for industrial and consumer applications: Offer highest levels of visual fidelity and integration with specialist optics 🌱 Compatible…
Feature You will need a compatible add-on board (HAT) to use this NVMe drive with a Raspberry Pi 5, such as the Raspberry Pi M.2 HAT+, or pick up a great-value Raspberry Pi SSD kit with the Raspberry Pi M.2 HAT+ included. 🌱 Official Raspberry Pi SSD 🌱 256GB NVMe – 40k IOPS (4kB…
Based on the Pico interface design of Raspberry Pi, it can be directly inserted after being welded Package Contains Speaker module x 1
Buy 1.3 inch LCD Display Module for Raspberry Pi Pico/Pico W. This 240×240 IPS screen features ST7789 driver, SPI interface, and embedded joystick & buttons. Includes MicroPython/C examples.
