Показаны результаты 201–220 из 334
-
$9.90
NFC-Driven Multi-Size E-Ink Display Development Kit NFC-D3-029 is a compact NFC-powered driver board for 2.7″, 2.9″, 3.7″,and 4.2″ E-Ink displays (mono, 3-color, 4-color), enabling wireless updates with no battery required. – Supports BMP/PNG/JPG; FM1280 NFC IC; ISO14443-A compliant Special Features ● Eco-Friendly and Battery-Free: Utilizes NFC power harvesting, eliminating the need for batteries or external…
-
Оценка: 5.00 из 5
$3.30
Features: 1. This is a 0.96-inch ESP8266 OLED board that delivers all the features of the ESP826 module. 2. Seamless integration with a 0.96-inch OLED display eliminates the need for cables and test boards. 3. The board uses I2C to connect to the OLED display via the NAS (D6/GPIO14) and SCL (D5/GPIO12) pins. 4. The…
-
$3.70
Introduction SuperMini NRF52840 is a Pro Micro alternative development board that is compatible with Nice! Nano. Its pins are the same as ProMicro, which means it can be used with almost any ProMicro keyboard. The NRF5280 development board has a 3.7V lithium battery interface and a software switch that can cut off the power of…
-
$10.90
Introduction Based on the in-depth optimization design of the original Nordic nRF52840 Dongle USB Dongle for Eval Bluetooth development tool module, there are many improvements on the original basis and retain the electrical characteristics of the original module. Compatible with all programs of the original nRF52840 Dongle. Factory firmware supports nRF Connecto for PC Specification…
-
$116.80
The Ochin CM4v2 is a tiny carrier board for the Raspberry Pi Compute Module equipped with the powerful Quad-core Cortex-A72 CPU and GPU, which features a big RAM size, the CODECs, and Graphic Accelerators. It’s designed for a wide range of applications such as robotics, home automation, and IoT projects. The Raspberry Pi Compute Module…
-
$1,750.90
This is the OCP-TAP Time Card, with the full design files available at https://github.com/opencomputeproject/Time-Appliance-Project. It comes pre-installed with the Alinx FPGA SOM, U-blox NEO-M9N RCB, and OCXO daughter card. All programming has been done and functionally tested before shipment. For any issues or concerns, please make an issue on the Github listed above. Time Master is…
-
$22.90
Raspberry Pi M.2 HAT+ Compact Official Raspberry Pi PCIe to M.2 HAT, Designed for Raspberry Pi 5 Adapter For NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing Features The Raspberry Pi M.2 HAT+ Compact is designed for use with the Pi case for Raspberry Pi 5. The Compact form factor enables you to connect M.2 M key peripherals…
-
$17.90 – $26.90Ценовой диапазон: от $17.90 до $26.90
Upgrade your Orange Pi 5 with this 13MP OV13855 camera module. Features a MIPI interface, 70mm/200mm cable options, and 82°/120° lenses for versatile computer vision projects.
-
-
Оценка: 5.00 из 5
$6.50 – $8.65Ценовой диапазон: от $6.50 до $8.65
Product Wiki & Technical Support Upload connection errors, USB-base checks, a simple board test and camera compatibility troubleshooting. Follow the instructions for your exact ESP32 or ESP32-S3 board. ESP32-CAM troubleshooting guide → OV3660 Camera Module 3 Million Pixels 65 80 120 160 Degree DVP Interface YUV Output Supports ESP32 Single-Chip Camera
-
$6.90 – $8.20Ценовой диапазон: от $6.90 до $8.20
Capture clear images with the OV3660 camera module. This 3MP camera features an adjustable lens, 80mm cable, and offers 66° or 160° FOV for versatile embedded vision projects.
-
$6.30 – $8.90Ценовой диапазон: от $6.30 до $8.90
-
$8.90
Capture high-quality images with the OV5640 camera module. This 5MP HD DVP 24-pin camera features a 15cm cable and offers 120° or 160° FOV for versatile embedded vision projects.
-
$17.90
Capture clear images with the OV5640 USB camera module. This 5MP HD webcam features autofocus and offers 66°, 120°, or 160° FOV options for versatile computer vision projects.
-
$4.70 – $6.30Ценовой диапазон: от $4.70 до $6.30
High-resolution 5-megapixel imaging Equipped with the OV5647 image sensor, this module delivers sharp 1080P video and photo quality, ideal for Raspberry Pi Zero projects requiring clear visual output. Multiple field-of-view options Available in 65°, 120°, and 160° viewing angles, this camera module suits diverse applications from narrow-angle surveillance to wide-angle capture with flexibility. Compact TQFP…
-
-
$15.90
Capture sharp images with the OV5693 USB camera module. This 5MP webcam features 1080P video, autofocus, and high resolution for computer vision and streaming projects.
-
-
-
$5.90
Introduction The special chip used in SX-GPI0-KA module is the PCA9555 of NXP company. The core is a 24-pin TSSOP packaged CMOS device. The core extends the input/output (GPI0) pin through the 12C bus/SMBus, with strong driving ability and low power consumption. The improved features include 4000pF drive capability, 5VI/0 port, working current less than…
