ESP32/Arduino-compatible prototyping supplies: breadboards, jumper wires, power modules, sensors. Great for IoT, DIY projects, fast circuit testing
Showing 61–80 of 294 results
Product features: 1. Three-color LED bright lights: still clearly visible in the sun, longer life than ordinary light bulbs 2. Strong beeping sound can also be used under strong sunlight: the beeping sound is strong when the voltage is high, and the green light is on when the voltage is low 3. Portable clip design:…
ACS712 Hall Current Sensor Module Hall Sensor 5V 5A 20A 30A Current Detection Board Module
Product Wiki & Tutorials Wire the 16-bit I2C ADC, distinguish gain range from input limits and read a known analog voltage using Arduino. ADS1115 with ESP32: Analog Input, Gain & Voltage → ADC Bit rate: 16 Bit Interface Type: I2C Channels: 4 Channel AN0 AN1 AN2 AN3 or 2 differential inputs Input voltage: 2.0-5.5v Channel…
Features: 1. Generally used to receive calls between aircraft and towers. With good antenna performance, the maximum range is 190Km. 2. Equipped with bandpass filter, adopts 3355 high-power amplifier, CD7358 high-power amplifier + mixing solution. 3. Supports AM mode, covering the 118-136MHz aviation band frequency range. 4. PCB printed inductor routing design simplifies the assembly…
Features: Charging in the daytime, automatically turning on the lights at night, and automatically turning off the lights at dawn, the output voltage is the output voltage when the battery has no voltage. The circuit controls the output by detecting the change of the voltage generated by the solar panel, without the need for photosensitive…
peculiarity The STM32WL is connected to the built-in expansion boardSTM32WL5MOCModules, including based®Cortex®M4/ M0+ Ultra low power consumptionSTM32WL55JC Microcontroller Multi-protocol LPWAN dual core in UFBGA73 package with 256KB flash memory and 64KB SRAM RF transceivers (frequency range 150MHz to 960MHz) support LoRa®, (G)FSK, (G)MSK and BPSK modulation 4MB CMOS serial flash memory and 256KB serial I2C Bus…
It can fill 15 pieces of 21700 li- batteries. But this is only a shell, there is no battery inside. Suit for DeWalt 20V For FlexVolt 60V Lithium Battery. It is used to repair and assemble batteries pack, only for people who are familiar with battery performance and have practical experience in battery assembly. No-Original,…
High-concerned chemical: None Compatible Drone Brand: Autel Robotics Specification 1: Downward Vision Position Sensor Specification 2: For DJI Avata 2 Downward Visual Specification 3: Downward Sensor Vision Module Specification 4: For DJI Avata 2 Specification 5: For DJI Avata 2 Downward Sensor Vision Color: Black Material: Plastic+Metal Package Contents: 1 * Module Only the above package content, other products are not included….
This product is a multimedia development board based on ESP32-P4, and integrates ESP32-C6, supporting Wi-Fi 6 and BLE 5 wireless connections. It provides a wealth of human-computer interaction interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART and TWAI, etc. In addition, it supports USB OTG…
Features: 100% brand new. 15+7 22 Pin Male to Female M/F SATA Serial ATA Power Extension Cable. Length: 29cm. Package Includes: 1 x 15 + 7 Pin Male to Female SATA Data Power Cable.
Buy Banana Pi BPI-M.2 to mPCIe adapter for BPI-R3. This expansion card enables Wi-Fi 6E network upgrades and mPCIe module integration for enhanced router performance.
【Overview】 RP2040-Core-A microcontroller development board Based On Raspberry Pi Official RP2040 Dual Core Processor, USB Port Adapter Board Optional, Compact Size, Separate Adapter Board Design, Castellated module allows soldering direct to carrier boards 【Features】 RP2040 microcontroller chip designed by Raspberry Pi Official Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 264KB…
Product selling point: 1. Using high-quality materials, the quality is guaranteed 2. Exquisite and beautiful appearance 3. Easy installation and simple operation 4. Adjust the voltage clockwise to high, and adjust the voltage counterclockwise to low 5. Wide application Product parameters: Control voltage: 12V Control current: 10A Precautions: Adjust the potentiometer carefully, remember to adjust…
Product Wiki & Tutorials Read temperature, humidity, pressure and gas resistance while keeping raw measurements separate from IAQ or CO2 estimates. BME680 with ESP32: Environment & Raw Gas Readings →
BMI088 Shuttle Board 3.0 Sensortec BMI088 Shuttle Board 3.0 is a PCB designed to evaluate the BMI088 6-axis inertial measurement unit. The BMI088 Shuttle Board 3.0 is delivered with the BMI088 mounted allows easy access to the sensor pins via a simple socket and can be directly plugged into the Sensortec’s application board 3.0. The…
GY-BMI160 module (three-axis gyroscope + three-axis acceleration) Chip used: BMI160 Power supply: 3-5v (internal low pressure difference voltage regulator) Communication mode: Standard IIC/SPI communication protocol Chip built-in 16bit AD converter,16 bit data output Gyro range: ±125 ±250 ±500 ±1000 ±2000 °/s Acceleration range: ±2±4±8±16g Metal-sunk PCB, machine welding process to ensure quality Pin spacing 2.54mm…
Product features: -Exquisite process and stable heat dissipation -Overvoltage protection Overdischarge protection -Charging protection Short circuit protection -Over current protection Over temperature protection -Charging equalization disconnection protection Product parameters: -Type: ternary/7S/24V -Wiring mode: same port -Overdischarge voltage of single battery: 2.7V ± 0.08V -Continuous working current: 25/20/15A (optional) -Instantaneous protection current: 60A -Overcurrent recovery…
The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. This breakout works with all FLIR Lepton modules.
The SparkFun WM8960 Audio Codec Breakout is a low-power, high-quality stereo codec with 1W Stereo Class D speaker drivers and headphone drivers. The WM8960 acts as a stereo audio ADC and DAC and communicates using I2S, a standard audio data protocol (not to be confused with I2C). This audio codec is chock full of features…
